-
Smart Home Security Alarm System
-
TWS Bluetooth Earphone
-
Multifunction Smart Watch
-
Bluetooth Smart Door Lock
-
Biometric Fingerprint Door Lock
-
RFID Card Door Lock
-
Electronic Digital Door Lock
-
Electric Magnetic Lock
-
Door Exit Button
-
Door Access Control Panel
-
Access Control Turnstile
-
Access Control Card Reader
-
Guard Tour Patrol System
-
Parking Management System
-
Walk Through Metal Detector
-
Face Access Control System
-
Rfid Card
-
UHF RFID Integrated Reader
-
face recognition temperature measurement
Wireless Remote Control Switch RF 315/433MHZ Relay Wireless POC809
Model | POC809 | RF Frequency | 433MHZ |
---|---|---|---|
RF Working Mode | Super Heterodyne Receiver | Remote Control Distance | >100 Meter(In Open Environment) |
Working Voltage | DC12V | Output Current | 10A |
Output | Normally Open,Common,Normally Closed | ||
High Light | door release button access control,security sensors for doors and windows |
Wireless Remote Control Switch RF 315/433MHZ Relay Wireless POC809
Specification:
1.Input Voltage: DC10-14V
2.Standby Current: <5MA
3.RF Frequency: 433MHZ
4.RF Working mode: Super heterodyne receiver
5.Receiver Sensitivity: >90dBm
6.Remote Control Distance: >100 meter(In open environment)
7.Decoding Way: MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type: Fixed code, learning code
10.Channel: 1CH
11.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage: DC12V
14.Output Current: 10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed
17.Dimension:3.5cm*3cm*1.6cm
Working/output way:
1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
4.Delay: Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Description:
1.Jog: Press the learning button then release, set the mode from the system automatically working mode to action mode, wait for a while, when the board LED off, said it is into the learning state, press the remote control, the system received the signal. The LED flashes 5 times and goes off again. After 3S delay, LED light marked learning success, the system automatically withdraw from the learning state.
2.Self-locking: Press the learning button, then release, press 2 times, the system automatically set to self-locking mode, wait for a while, LED off, it is into the learning state, press the remote control, LED flash 5 times Off. 3S after the delay, LED light learning success.
3.Interlock: press the learning button, then release, press 3 times in succession, the system is set to interlock mode.
4.Delay: Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Package included:
1CH 433MHz Wireless Relay Switch Receiver