Place of Origin:
TCP/IP and RS485 network Intelligent 1 door access control panel board with Software management Interlock function
Access Systems are built on flexible, open technology to provide management, real-time monitoring, and control of your access control system- all from a browser, with no additional software to install. Our secure Web-hosted infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location.
1. Multiple hardware protection measure
There are over-current protection, over-voltage protection, reversal protection for the power supply and all the input and output terminal.
2. Integration with Other Security Systems
C3-100 can be integrated with other security systems such as CCTV, fire alarm, BAS (building automation system) and other systems to configure total security system.
3. Supports different wiegand reader
The controller supports different wiegand format, and can connect to different reader, including ID card reader, card reader and HID reader etc.
4. Input/ Output Ports to Control Doors
Connect with variety of sensors, alarms, exit buttons, electric lock and other devices.
5. Variety of Communication Function
Using either serial or TCP/IP communication, it provides reliable network system
6. B/S structure software
It is easy to manage the system by browser from client PC. There is no need to install software on each client.
7. Normal open after first punch card can be setup
7. Real-time Monitoring of Door status
Using the management software, it allows real-time monitoring and control of door open and closing of the whole system.
9. Simple Access Control System Configuraiton
10. Interlock Function
11. Multi-card operation:
This function is used to manage visitors or to manage some special high secure place. The doors are opened whten appointed number registered cards are read together.
13. Duress Mode
14. SDK available
The system integrator can use the SDK to integrate the hardware into their existing access control software system or to develop a new software.
|CPU||32bit MIPS CPU|
|Flash Memory||256M bits|
|Power/Current||DC 9.6-14.4V, Rated Max. 1A|
|Reader Port||2ea (26/34bit Wiegand, 8bit Burst for PIN)|
|Baud Rate||38,400bps (Recommended)/9600bps,19,200bps, 57,600bps (selectable)|
|Input Port||2ea (Exit Button#1, Door Sensor#1)|
1ea(1FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC)
1ea (1 Aux FORM-)
|LED Indicator||Yes, LED indication for communication, power, status and punch card|
|Operating Humidity||10% to 80% relative humidity non-condensing|
345(W)*275(H)*70(D)(with power supply and metal box)
Send your inquiry directly to us